B & BC Slot drain with intermittent slot, basic. We produce all slots for loads D400, E600 and F900. A special anti-slime surface developed for use on construction ŘSD.

B & BC reinforced concrete pipe with outlet foot with basalt lining 180°. Oven according to SN EN 206 XF4, XA3. Certificate for use in culverts in the SŽ administration.

The Halogen MP5 sensor sets a new standard that measures five parameters and amperometric chlorine without membranes or reagents. The MP5 does not require a waste stream and can be used in many installation and monitoring configurations unaffected by flow or pressure. In accordance with EPA method 334.0, the MP5 sensor can be used for reporting chlorine residual measurements. Measures free chlorine, pH, conductivity, temperature and ORP. Can be installed directly in a pipe. It is self‐cleaning.

It is based on a high-resolution UV-visible spectrograph. It simultaneously monitors many different parameters for wastewater treatment plants or river monitoring stations with excellent stability and low costs. The same spectrograph can measure organics, nitrates, color, turbidity, phosphates, ammonia and hydrogen sulfide. The fluorescence module measures aromatic hydrocarbons (PAHs) and the infrared laser diode nephelometric turbidity. The patented flow cell allows very high solids content.

The FRONTLINER vehicle version is the ideal solution for anyone requiring maximum flexibility and working range, even under challenging conditions. Additionally, the vehicle is equipped with a unique hose guidance system that ensures long-term operation with minimal maintenance, and most importantly, a sophisticated system for convenient vehicle operation.

The milling robot for house connections is designed for diameters from DN 100 to DN 250. Thanks to its compact size and dimensions, the MICROautomatic E is practical and flexible for a wide range of applications. The air-cooled electric milling motor with integrated speed control sets new standards in terms of performance and environmental friendliness. Unlike pneumatic cutting robots, this system offers significantly lower noise levels.

The fully equipped compact water meter shaft SVODA is designed for the safe placement of water meters (also suitable for groundwater). Readings and replacements of water meters are provided from above, as the water meter is located in the upper part of the shaft. The water meter is protected from frost by a thermal insulation cover. Great variability of sets: for water meters DN 15-32, for 1 and 2 water meters, brass ball / gate valves, height 1000 / 1200 mm, plastic / cast iron covers.

The LCT 307i combined transmitter is designed for the continuous measurement of liquid level, conductivity, and temperature. With a single device, it is possible to reliably monitor water conditions in boreholes, wells, swimming pools, and at the outlets of wastewater treatment plants.

D technology® measures high and low flow rates best in class (from 0.005 mᵌ/h and up to > 90 mᵌ/h).

For pipes DN 50 - 300 mm. 4D technology® measures best-in-class high and low flow rates (from 0.005 mᵌ/h and up to > 90 mᵌ/h.